Shop

Headed Bush
Headed Bush

Headed Bush

Headed bush are used to control hole depth. The collar of the bush provides positive stop against the jig plate. The collar also prevents axial movement of the bush with the drill. The bush is either placed close to the workpiece or far enough away from the workpiece to permit swarf to escape between it and the workpiece. Headed drill bushes are provided with seating of the bush in the hole in the drill plate and undercutting the head of the bush. A lead is provided for easy entry of the bush in the drill plate Order Example: H-40-8-3/8

Download Brochure

Read more
Special Slip Fixed Bushing
Special Slip Fixed Bushing

Special Slip Fixed Bushing

Sometimes the centre of the drilled holes is placed so close to each other that it is impossible to provide any drill bushes in the jig plate. Under such circumstances, a combined plate-type of bush is used.  The plate bush is made of Tool Steel.  Several bushes can be combined into a single plate bush. The plate bush is screwed and dowelled to the jig plate. Order Example: Order Example: Product specification with diagram print.

Download Brochure

Read more
Special Plunger Valve
Special Plunger Valve

Special Plunger Valve

The plunger pump consists of two main components: the power end and the liquid end. The power end converts the rotating movement of a drive motor into an oscillating forward and backward movement of the plunger. Crankshaft, connecting rods and crossheads are used for this purpose. Order Example: Product specifications with diagram print.

Download Brochure

Read more
Knurled Clamping Nut
Knurled Clamping Nut

Knurled Clamping Nut

These nuts are mainly used in application where there are no high clamping pressures are required. Tilt the nut to slide on, then straight it to engage the threads. Order Example: Product specifications with diagram print.

Download Brochure

Read more
Lock Spindle
Lock Spindle

Lock Spindle

Spindle lock can also be used to finish off the tightening of a screw, so that you don't drive it too far into the surface of the material. Order Example: Product specifications with diagram print.

Download Brochure

Read more
Plunger Valve
Plunger Valve

Plunger Valve

The plunger pump consists of two main components: the power end and the liquid end. The power end converts the rotating movement of a drive motor into an oscillating forward and backward movement of the plunger. Crankshaft, connecting rods and crossheads are used for this purpose. Order Example: Product specifications with diagram print.

Download Brochure

Read more
Stem
Stem

Stem

A valve stem is a self-contained valve which opens to admit gas to a chamber (such as air to inflate a tire), and is then automatically closed and kept sealed by the pressure in the chamber, or a spring, or both, to prevent the gas from escaping. Order Example: Product specifications with diagram print.

Download Brochure

Read more
Renewable Bushing (Remer)
Renewable Bushing (Remer)

Renewable Bushing (Remer)

Used for continuous or large batch production. It is used when the bush wear is more, and it need to be replaced frequently.  Headed or flanged bush. It can only be taken out of liner bush by removing the retaining screw.  Flat is provided on the collar to prevent rotation and axial movement of the bush. The flat arrests with the collar of the retainer shoulder screw. Order Example: SF-32-16-.2036 R

Download Brochure

Read more